 News | Forum | People | FAQ | Links | Search | Register |
Log in |
|
|
Obviously Id1
Yes, but almost everybody uses QuakeSpasm, so it's fine to consider a target engine. ..also, where the HELL should it be submitted?? Package the Alternatively catch me on the Quake Mapping Discord. I'm new to trenchbroom, been messing around with it after watching some tutorials just to get a handle on working with the software, and the entity info_player_start seems to be emitting that teleporter ambience. how do I get rid of this?
If you have a monster spawning in using the point entity method set the spawnflag to 2 for silent. That will solve this issue.
When I made the entity tutorial I was unaware that that hack caused the teleport sound to play at origin 0.0.0 Hopefully this is the cause of your issue. If you have a monster spawning in using the point entity method set the spawnflag to 2 for silent. That will solve this issue.
When I made the entity tutorial I was unaware that that hack caused the teleport sound to play at origin 0.0.0 Hopefully this is the cause of your issue. Greetings everyone! I'm pretty new at Quake mapping and mapping in general for that matter and need help.
I'm trying to build a map for Quake Rally. It is a rough recreation of Bowser Castle 1 from Mario Kart. When compiling the map it seems to do fine but when it runs Quake (I use Qrack by the way) it plays my pc's error sound and closes Qrack. I can fix this by changing the sky brush to a different texture and getting rid of the lava. This allows the map to compile and launch. Once I get in the game though it spawns me in one of the outer walls instead of where the info_player_start is. I can walk out of the wall and fall to the floor. Once i'm on the floor I am able to walk around the bottom of the map until i hit an invisible wall or the game window turns black. I've tried all I can think of and can't get it to work properly, any help would be greatly appreciated. Thanks. What are the coordinates of your info_player_start? Likely the entire map needs to be shifted to be inside +/-4096.
Yep that's it. Select all and move to center everything over the world's 0 0 0. Make sure you have Texture Lock on when you move it or everthing will get off.
Quake has a max positive or negative position of 4096 in any direction. I believe you can still have stuff past 4096, like distant towers or some such, it just won't be reachable. <side note> certain engines allow for larger maps if you compile with -bsp2 but I don't recommend it for beginners unless your map is truly that gobsmackingly huge. Merry Christmas ! I see that you are the author of the top notch youtube tutorials. I did not want to be more specific in my initial post. What I am attempting is to add a generic game, namely Kingpin. I again followed your setup tutorial. I was able to add a def file(which initially did not provide for a worldspawn) but by cutting and pasting other def or fgd files I overcame that problem. That does not mean the I solved the problem. I was also able to get the textures in Trenchbroom though I can't be specific as to how.
Maybe this log will help. By no means do I expect you to solve this but any suggestions would be great ---- qbsp / ericw-tools v0.18.1 ---- Input file: k1.map Output file: k1.bsp ---- LoadMapFile ---- *** WARNING 06: No info_player_deathmatch entities in level 36 faces 6 brushes 3 entities 1 unique texnames 3 texinfo *** WARNING 00: No wad or _wad key exists in the worldmodel Processing hull 0... ---- Brush_LoadEntity ---- 6 brushes 12 planes ---- CSGFaces ---- 36 brushfaces 24 csgfaces 12 mergedfaces ---- SolidBSP ---- 24 split nodes 6 solid leafs 19 empty leafs 0 water leafs 0 detail leafs 0 detail illusionary leafs 0 detail fence leafs 0 illusionary visblocker leafs 33 leaffaces 33 nodefaces ---- Portalize ---- 19 vis leafs 19 vis clusters 48 vis portals ---- FillOutside ---- 18 outleafs ---- MergeAll ---- 6 mergefaces ---- SolidBSP ---- 6 split nodes 6 solid leafs 1 empty leafs 0 water leafs 0 detail leafs 0 detail illusionary leafs 0 detail fence leafs 0 illusionary visblocker leafs 6 leaffaces 6 nodefaces ---- Portalize ---- 1 vis leafs 1 vis clusters 0 vis portals ---- Tjunc ---- 12 world edges 24 edge points 0 edges added by tjunctions 0 faces added by tjunctions ---- MakeFaceEdges ---- ---- GrowRegions ---- Processing hull 1... Processing hull 2... *** WARNING 16: Texture b_cp_v18 not found ---- WriteBSPFile ---- Wrote k1.bsp 17 planes 340 8 vertexes 96 6 nodes 144 3 texinfo 120 6 faces 120 12 clipnodes 96 2 leafs 56 6 marksurfaces 12 24 surfedges 96 13 edges 52 1 textures 8 lightdata 0 visdata 0 entdata 401 0.031 seconds elapsed Peak memory usage: 168816 (164.9k) 0....1....2....3....4....5\
WARNING: RecursiveLeafFlow: recursion on leaf 550 Help please. Yes I have googled and searched through this thread and see leafs mentioned a lot but don't understand what is going on nor how to fix it. Yes I have used a LOT of func_detail_walls and func_detail_illusionaries Yes my map does have a lot of botched rotated stuff tho. Ta x Any idea how to fix or reduce the Leaf Recursion error?
Incidentally, I didn't get this error when I did a fullvis a week or two ago, when I already had almost all of the rotated stuff in place. I assume the warning message doesn't indicate the area of the map where the problem is?
Is what you've posted all the info that you have? trying to compile map with options (using ericw-tools 0.18.1):
light.exe -lmscale 4 And here results on different sourceports (latest available versions): FTE https://imgur.com/a/6mLY1mM QS https://imgur.com/a/GyzozC8 QSS https://imgur.com/a/jE0nvBA For FTE all working well. According to http://www.celephais.net/board/view_thread.php?id=4&start=19267&end=19267#19267 this feature supported by QSS, but actually not, or im doing something wrong? Maybe i need some additional parameters or config tweaks for QSS? And is this feature supported by QS? And one more question about ericw-light. When im using options: light.exe -extra4 -lmscale 4 it reports error: C:\projects\ericw-tools\light\trace_embree.cc:696: Q_assert(rayindex <= 32767) failed. Anyone know any workarounds for this particular options combination? Hey, I downloaded gtkradiant, made a test map, and found the bsp menu empty, so I cant compile. I then found a link to netradiant, made a testmap and tried to compile. it makes a testmap.bak file. I need a bsp file right? the hell do i do?
That's because GtKRadiant is an editor, not a compiler.
For god compiler files search for ericw compiler I tried a long time to get the compiler running under Radiant. Then I decided to use the editor for maps, and save the map to a different file with the compiler tools. Works fine now. thanks for the reply madfox. I see now in radiant when i use the compile options it writes it to qe3bsp.bat, but the syntax is all wrong so it doesnt work. I downloaded the ericw tools and did it manually. The level loads, but the textures don't. Any idea why?
Check for spaces in the pathnames to your wad. Compilers can chock on those. I recommend using Necros' Compiling GUI to simplify the process. https://shoresofnis.wordpress.com/utilities/ne_q1spcompilinggui/
I don't know why you're getting different results in qss from either of the other two engines.
what I can say, however, is that you should be using the _lmscale worldspawn/entity key instead of the -lmscale commandline arg - this will fix QuakeSpasm/others (by providing multiple sets of lightmap data in a backwards-compatible way, allowing for opportunistic upgrades). (This also allows different lightmap scales per func_detail etc, unlike the commandline arg.) When the wad file doesn't load it means the path is unclear.
You can open the *.map file with TexPad and at the beginning you see something like: "classname" "worldspawn" "message" "MyMap" "worldtype" "0" "sounds" "4" "wad" "C:/Quake/ID1/Quake101.wad" It is the wad path you should look at and make sure the wad files are in C:\Quake|ID1\... |
|
|
|
|
|
| You must be logged in to post in this thread. |
|
| Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors. |