All qc must be subsumed into the collective.

I can't open your zip, 7zip says its corrupt. Maybe try putting it on quaketastic. (see screenshots thread for login+password)

What's wrong with the elevator? I never noticed anything on my last playthrough. Granted I think I was 14 at the time.

Buzzsaws interpolation:
Do you mind sending me what necros said to you? Also, are both progs.dat files in your rar? I can decompile the progs to find out what all else he did to it. I've become a qc comparison junky of late what with AD absolutely doing everything better so of course I had to update my own personal mod to add some awesomeness. 

Well honestly, "I hope someone can do this" sounds a bit like asking people to do it for you... ;) Anyway, this thread is dedicated to Quakespasm and people here are not too fond of off-topic, so you should move your problem to that thread instead: http://www.celephais.net/board/view_thread.php?id=60097
I wish I could help more but I know about as much QC as you. 

Check this out. Few hours ago, I tried compiling Rogue progs.dat from untouched Rogue source code (QC files). Guess what? Elevator doesn't work. I can't explain it, since the elevator DOES work with progs.dat located in original PAK0.PAK straight from the Rogue CD. Is it possible that Rogue CD contains different version of the PAK0.PAK file, with some kind of fix?

Necros said:
"The buzzsaw doesn't actually move in the normal way. What it looks like (only from looking at the QC) is you make a func_train or something that the player can't see. Then you target the train with the buzzsaw. Every 0.1 seconds, the QC sets the origin of the buzzsaw to the targetted train. This is why it doesn't interpolate, because it's not supposed to-- the QC call is setorigin."

Necros patch: http://s000.tinyupload.com/index.php?file_id=67396143984564862910

Seven's fixes: http://s000.tinyupload.com/index.php?file_id=56371481422796763833 

(Seven's fixes still corrupted, I don't know why, here's a direct link from QuakeOne)

https://www.dropbox.com/s/j2zixlpqcpt5tjy/ROGUE%20fixes%20V1.11.rar 

Post your QuakeC questions in the following thread, which is a Quake help thread:

http://www.celephais.net/board/view_thread.php?id=60097

Your hipnotic buzzsaw issues have nothing to do with the Quakespasm engine. 

You'd better listen to Baker this time if you don't want to piss people off. 

System, ubuntu 16.04, running latest quakespasm, quakespasm executable (does not occur in quakespasm-sdl2) lauched from terminal without any parameters.

Replicating the bug:

Upon load of the game, new game is selected. *Just* before the console retreats all the way to the top the tilde key is pressed and the console comes down again.

Here is where the bug occurs, the console, instead of staying down, goes back up. Now every time the console button is hit, the console will drop, then return back to the top.

This also affects other keys, if you then hit escape and go to "new game", when you're prompted "Are you sure you want to start a new game", the game will accept no input.

Alt-Enter is locked, so I can't quit the game, Escape is locked so I can't return to the menu. All I can do is change terminals (ctrl-alt-F1) and kill quakespasm. 

I reposted it to the bug tracker, hope you don't mind: https://sourceforge.net/p/quakespasm/bugs/17/

I have seen it before and IIRC it was SDL1.2 sending invalid key presses, but it would be good if QS behaved better if possible instead of locking up.
Good that SDL2 is working properly though, that was my experience as well. 

I've been using the 1.2 up until this point in time because for some reason my system (or quakespasm) wanted 32 bit SDL, vorbis and mad libs.

I didn't have them installed because I've been trying to avoid system bloat. I've installed them now though. Fingers crossed it won't break any of my other games :) 

weird, I'm having trouble reproducing it at the moment. The last time I saw the bug was a year ago or so, but I don't run QS on linux very often, just when testing releases really. I am also on Ubuntu 16.04 with all updates applied, and using the unity desktop.

Just to double check the SDL version you have, mind running this?
dpkg -s libsdl1.2-debian | grep Version 

The command you supplied tells me its not installed, the version I have installed is 1.2.15+dfsg1-3 according to synaptic.

I just looked up what dfsg meant, apparently its debian free software guidelines. Now I wonder if the dfsg version is behind the non-dfsg version. 

I'd just like to make the following correction. Over a month ago , post #2571, I reported a problem with Quakespasm and the latest Nvidia drivers cause an ungodly texture blurring scenario, and I was curious as to why nobody else was experiencing the same issue.

As it turns out it was my fault. I did a complete uninstall/install of Nvidia's latest Windows 7 drivers, totally clean. The problem was gone, so I can only conclude it was a certain graphic setting I had used within Nvidia's control panel, but which one it was I don't know. Or it may have been something else entirely.

But either way nothing is wrong with Quakespasm, nothing (as far as graphics are concerned) needs fixing, and I apologize if I caused any time wasted trying to figure out a problem that was never there. 

Is the culprit responsible for Quakespasm's blurry texture scenario when using the latest Nvidia drivers. Avoid using that setting. 

OK, when minimised, Quakespasm's CPU usage shoots right up to use over 20% of my CPU, and my fan kicks in to overdrive (happens the same whether I'm in fullscreen, then alt-tab to windows - or in windowed mode, then I minimise the window).

I'm using the SDL2 version. 

I implemented a lightmap format change that may help the AD start map performance on your Intel graphics system:

1. unmodified svn r1371
2. new lightmap format (GL_BGRA GL_UNSIGNED_INT_8_8_8_8_REV)

I wonder if you could test these two buildson your system and report what FPS range you get in ad1.5's start map for each build.

link to source code 

I can't measure any difference between those builds on:
-Intel HD Graphics 4400 (2013? laptop)
-Intel 855GM (2004 laptop) 

Back a few years, I tried that modification. Tried the binary on several machines, couldn't locate one where it made a difference (Intel, GeForce, Radeon, etc.)

I believe such machines do exist, but I just didn't have any of them. 

Baker, yeah.. MH mentioned in the insideqc thread:

This is only really important for Intels that have hardware T&L - say, the 965 onwards; it seems as though earlier generations are more tolerant.

I guess my old intel is the more tolerant earlier generation.. and my newer 4400 came out several years after that thread, so apparently Intel fixed the perf issue by that time. 

Yeah, I haven't tested this in a long time but I don't believe it's an issue any more either. GL_RGB should still be an issue, but GL_RGBA should be fine. 

Just for reference, I've tested these builds on a more recent Intel 520 machine without measuring any difference either. This supports my guess that with DX10+ class hardware (where Microsoft forced the vendors to standardise on RGBA) it no longer matters.

A more interesting benchmark would be gl_flashblend 1 versus gl_flashblend 0. That would really help determine if it's dynamic light uploads. 

Thanks. For reference, build #1 I posted above (and QS releases) are using GL_RGBA / GL_UNSIGNED_BYTE.

--
Question for Shamblernaut:
Can you still reproduce the console retraction bug with sdl1.2? I just tried again and can't trigger it (though I remember seeing it like 1-2 years ago).
I tried in the default ubuntu 16.04 Unity desktop as well as the "ubuntu flashback (metacity)" one. Tried both windowed and fullscreen. 

This time on an Intel HD2000, which is closr in performance to @QuakePone's, but still no measurable difference. 

You can disregard my question, managed to reproduce the console retracting bug 

That's what I get for skim reading.

As an aside, is there any particular reason for console commands being case sensitive? I understand that filenames require it, especially in *nix based systems. Is this just a legacy code thing or are some commands actually case sensitive? 

in certain cases, yes, especially if you're exposing them to qc.
there's no good reason for case-sensitive tab completion though.