Please note that this bug occured in my IRC fork of 0.93.0

I just got a: "TexMgr_ReloadImage: Invalid source for player_0"

Error occurred in the middle of a game whilst quickloading and quicksaving a lot, also while recording demos.

This bug caused the save file list to disappear, it also caused loading saves from disk to fail.

video of failure: https://www.twitch.tv/videos/280904822 

Just tried vkQuake. That indeed solves most of the banding issues. Also like that it has classic water. Thanks for this tip :) 

scratch that last bug report. It occurred again last night without the "TexMgr_ReloadImage: Invalid source for player_0" message. I'm inclined to believe that the bug I'm facing caused that error rather than being caused by it.

either way, with my shoddy coding it could be anything XD 

I have a feature request. The following binding doesn't work properly in Quakespasm while it does work in a few other source ports like Qrack:

alias +movejump "+jump;+moveup;"
alias -movejump "-jump;-moveup;"
bind space +movejump

Jump works just fine but when underwater, the player moves up as if holding the jump key rather than the move up key. It makes swimming up slower than it should be. 

In Qrack or Mark V, type pq_moveup 1 and you don't need any of that.

Feature originated in original ProQuake and spread to about every engine both of the Quake and Quakeworld variety including FuhQuake/ezQuake/FTE/FodQuake (in QW engines and JoeQuake the cvar is called "cl_smartjump" instead). 

Thanks Baker. It turns out that pq_moveup is 1 by default in Qrack, which would explain why the binding seemed to be working when it was really just the cvar. However, setting it to 1 in Mark V causes weird issues - it will stay locked swimming up when I press jump until I press the moveup key. Even pressing movedown won't cancel swimming up and staying at the surface. 

Is there any way to get the classic software "wavey" water warp when underwater? I don't remember in which engine, but I seem to remember some of them did this. Maybe I am wrong though.

Another thing is, when reloading a game of the same level it restarts the music track, this is probably correct "vanilla" behavior, but is there a way around this? Maybe some CVAR that controls this behavior so there's an option not to restart music track.

And some maps have no music track info or have it set to "0" which results in no music playing. Maybe introduce a CVAR for random music track start (and/or override the map setting)?

Would be so nice

Then again simpler workaround would be having a Quake OST playlist on shuffle in some media player in the background. 

FTE does (r_waterwarp 1).
DirectQ does, if I remember right.
And I think vkQuake does too, but it might just be surfaces.
(don't expect them to have the same scale as the software-rendered engines - higher resolutions result in far too many repeats in the vanilla software renderer) 

has water warp as well. 

bugs
-
>sometimes the player can get stuck going down/up ramps/angled brushes, touching obtuse (convex) corners. See the images for examples
https://ibb.co/mm18p8
https://ibb.co/jVdop8
>sometimes monsters teleport-in without particle effects

suggestions
-
>increase the limit of the number of particles. Sometimes, particles vanish from launched rockets during very chaotic battles 

sometimes monsters teleport-in without particle effects
i guess it's a 'spawn silent'/no gfx mode

increase the limit of the number of particles.
there's a command line option -particles 

Getting stuck on those corners is not an engine bug. It's an issue in the map, or the compilers to be precise, and occurs during the QBSP stage.

Particles can be increased manually using the commandline option like спы says. 

Its an engine bug in SV_RecursiveHullCheck.
FTE+DP+ezQuake all have fixed(and more efficient) versions, and porting FTE's over to QSS fixes the issue for me.
However there's a potential risk for things to fall out of one of the thousands of possible maps out there. Its probably not a huge risk, but its still there, hence why I was too paranoid to make that change.
Paranoia is a really bad thing. :( 

Hi, I think this is my first post...

In this port, is it possible to make the ogre and the zombies take into account your height when they shoot their projectiles?.. 

it's not the engine feature, it's QC thingy

i believe it's called z_aware monsters behavior

AD has that feature, some mods too 

Port/Engine - runs mods and sometimes has extra features to help with mods.
QC code - allows monsters, weapons, etc. to work properly. All engines already support angles and vectors so adding z-aware enemies for, e.g., ogres, zombies, flak ogres, etc. has been a thing for a while already. AD does the best job in my opinion because it uses a flag on the monster that allows for mappers to choose whether they want particular enemies to be z-aware or not giving mappers the most power. 

I was under the assumption that the sticky corners (always only 45° it seems) was some QBSP mess-up. Tbh I didn't even know it occured in the stock maps, too. Only ever came across it in custom maps... maybe because the id maps are mostly boxy. 

I've been looking around for a while and can't seem to find any info on this. In quakespasm and quakespasm spiked as of 0.93.1 and r10 respectively I can't start a new game and if I launch a map manually the textures all look corrupted and the the lighting seems messed up as well. this only happens in 0.93.1 and r10 but not in 0.93.0. Any help would be appreciated. 

https://imgur.com/a/O1ECIKz

The first two are from 0.93.0

The second two are from spiked r10. Its the same in 0.93.1 

 

Weird, not sure why that would happen with 0.93.1.

Can you type "condump" at the console and then upload the id1/condump.txt that is saved?

Does adding "-noglsl" to the command line fix it? 

adding -noglsl to the command line does fix it but it still refuses to start a new game.

here is the condump without the -noglsl thanks for the quick help

IPv4 UDP Initialized
IPv6 UDP Initialized
WIPX_OpenSocket: Address family not
supported by protocol family
WIPX_Init: Unable to open control
socket, IPX disabled
Exe: 11:02:38 Jun 3 2018
256.0 megabyte heap
Video mode 1920x1080x24 60Hz (24-bit
z-buffer, 0x FSAA) initialized
GL_VENDOR: Intel
GL_RENDERER: Intel(R) HD Graphics 530
GL_VERSION: 4.4.0 - Build
20.19.15.4549
FOUND: ARB_vertex_buffer_object
FOUND: ARB_multitexture
GL_MAX_TEXTURE_UNITS: 8
FOUND: ARB_texture_env_combine
FOUND: ARB_texture_env_add
FOUND: SDL_GL_SetSwapInterval
FOUND: EXT_texture_filter_anisotropic
FOUND: ARB_texture_non_power_of_two
FOUND: GLSL
Intel Display Adapter detected,
enabling gl_clear

Sound Initialization
SDL audio spec : 44100 Hz, 1024 samples, 2 channels
SDL audio driver: directsound - Speakers / Headphones +SSE3 (Realtek Audio)
Audio: 16 bit, stereo, 44100 Hz
CDAudio disabled at compile time

========= Quake Initialized =========

execing quake.rc
execing default.cfg
execing config.cfg
execing autoexec.cfg
3 demo(s) in loop
]condump 

Since -noglsl fixed it I decided to test out the uncoupled frame rate that spike offers and noticed in the condump that it was using the intel integrated graphics so I went into the nvidia control panel and forced it to use the 1070 I have and now it looks fine and launches a new game gust fine, even without -noglsl. Thanks for the help and I'll provide any additional info I can to fix the intel graphics if you want. 

That helps, I'll see if I can reproduce on a system with Intel graphics 

What is the particle limit currently set at?

For the "teleport-in without particle effects", Are you certain it's a map issue? For example, sometimes when a group of monsters tele-in, only one or two will have the particle effect, while the rest only play the tele sound

bugs
-
When going up, on an elevator, sometimes the player 'sinks into it' then 'pops out', even multiple times in longer rides. Especially if you look up while the elevator is going up