News | Forum | People | FAQ | Links | Search | Register | Log in
Mark V - Release 1.00
http://quakeone.com/markv/

* Nehahra support -- better and deeper link
* Mirror support, "mirror_" textures. video
* Quaddicted install via console (i.e. "install travail")
* Full external texture support DP naming convention
* Enhanced dev tools texturepointer video inspector video
* IPv6 support, enhanced server capabilities
* Enhance co-operative play (excels at this!)
* Software renderer version (WinQuake)
* "Find" information command (ex. type "find sky")

Thanks to the beta testers! NightFright, fifth, spy, gunter, pulsar, johnny law, dwere, qmaster, mfx, icaro, kinn, adib, onetruepurple, railmccoy

And thanks to the other developers who actively provided advice or assistance: Spike (!), mh, ericw, metlslime and the sw guys: mankrip and qbism.

/Mac version is not current yet ...; Linux will happen sometime in 2017
First | Previous | Next | Last
Because You Forgot To Copy And Paste Your .cfg From Id1 
 
That's Weird Then 
I am used to Mark V taking all settings from config.cfg located in the id1 folder... 
#1954 
Here's my QuakeSpasm parameters for AD. They're from the readme:
-game ad_v1_50final -heapsize 256000 -zone 4096

The ad_sepulcher readme says to use these:
-game ad +map ad_chapters

I'm not sure if something else could be causing system overload. Maybe the Intel HD Graphics 3000 drivers emulating stuff in software? 
 
I've implemented a SV_TouchLinks "fix" in my code, and it broke the end-of-level teleporter in the map Citadel of Doom. That map is good for testing. 
 
Spike's more robust SV_TouchLinks fix works fine in that map.

The Intel HD 3000 should not be emulating anything in software; it's right at the start of the "Intel graphics are no longer crap" era and IIRC will even run Doom 3. 
Isn't "heapsize XXXXXX" Deprectaed In Current Engines? 
I thought this was no longer needed... 
 
mh: Yeah, I've played Doom 3, Quake 4 and the 2013 Shadow Warrior in it. 
 
Aw hell!

So many posts to read.

I had super-Android obsessive tunnel-vision "I will beat this platform into the ground and make it do my bidding" madness.

I figured there were be 5 new posts here, instead there are maybe 35-45 haha!

I will read them. But a bit too much too digest right now -- I see something about a TouchLinks thing, I have some sort of TouchLinks fix in Mark V from some other respected source but apparently not good enough for the issue in question. 
Baker 
Do QuakeDroid bugs belong here or in the QuakeDroid thread. Enjoying QuakeDroid a lot btw. 
@qmaster - Yeah, QuakeDroid Thread 
Yeah, QuakeDroid is a different kind of animal.

So all QuakeDroid talk should be in the QuakeDroid thread.

I'm glad you are enjoying QuakeDroid. 
@spike/@cadaver 
@Spike - thanks for helping Cadaver with his multiplayer.

@cadaver - Glad you got it working. Mark V uses Spike's single port server so just port 26000. 
@mh 
Touchlinks - I can't recall where/how I got the touchlinks fix. And if I recall, when I was acquiring Spike's QSS single port server/IPv6/server browser capabilities, his was slightly different. Mark V has "co-op players can walk through each other on respawn and the ability to save multiplayer games AND reload them with the wrong number of players.

So if the code their looks usual, lots of action going on. 
 
@nightfright - here in a couple of days, I'll see if I dig into the Chillo model pack thing.

@nightfright2 - I am used to Mark V taking all settings from config.cfg located in the id1 folder...

Mark V loads AND saves the settings to the Quake startup gamedir. If you start up Mark V in id1, it will use id1. If you start up in "-game rapture" it will use rapture.

So it sounds like you played, say, rapture and then changed the video mode, which causes the video mode to write to, say, rapture --- then you started id1, the video mode from id1 was the old one.

@mankrip - Ok, you are talking about a Quakespasm issue. I assume. 
@Baker 
Wondering if you could add support for light entities in the entity inspector mode? Just curious. Not a huge priority. 
@dumptruck 
Sure, I can put that on the medium-term wish list. I think (?).

I haven't thought about lights in a long time.

I'm not immediately sure if they stick around or just ones that can be toggled/flicker like the E1M1 nail gun up the lift that is dark until you trigger it.

Do you have something that prompted this thought that perhaps you were trying to do while mapping? 
Working On My Tutorials 
I was recording a basic lighting tutorial and wanted to show viewers what the diff light values and whatever other info was displayed. However no lights for me at all. I was using 1.50 and I do need to upgrade my video capture directory to the latest version.

Honestly, I'd hate for you to add it just for me but I think the functionality is very cool overall and was curious about why lights weren't included. I didn;t try to examine switchable lights. Will try that. 
 
You've done a great job with those video tutorials, I've read that they have help a lot of people.

My focus with the tool_inspector was mostly QuakeC/entities as an assist to mappers to be able to

1) To get the entity # for an entity!
2) examine why something does/doesn't work in their own map
3) check out the mechanics of a different map

So lights never even occurred to me.

So lights never crossed my mind. 
Again 
Not really a request. I'd rather you work on Gunter's wishlist. ;) 
Lights 
I'm not immediately sure if they stick around or just ones that can be toggled/flicker like the E1M1 nail gun up the lift that is dark until you trigger it.

Yep this is right, light ents are removed from the world on map load unless they have targetnames, or a sound/model attached to them (e.g. light_fluoro/globe etc). Simple enough QC alteration to disable this (misc.qc #45) but not sure how advisable that is. 
@rj 
Makes perfect sense. No not worth the effort IMO. 
Choppy Refresh Rate 
Maybe it's just me, but Mark V D3D9 starts to visually stutter on the default host_maxfps "72" when I'm moving and "mouselooking" at the same time. I normally play on 144, which is double the default, despite it causing physics bugs, so that's why I didn't notice it right away. Is there a special CVAR I could tweak or something I need to configure in the NVIDIA Control Panel? Or is it a bug? Doesnt't happen with Quakespasm btw, but that uses OpenGL.

Specs:
CPU: i7-4790k
GPU: GTX970
RAM: 16GB DDR3 800MHz Dual Channel (1600 MHz)
Main-/Motherboard: GigaByte B85M-HD3 R4

Thx in advance :) 
 
Sorry for the double post, but I don't know how to edit my posts. Do I need to register? Please forgive my ignorance.

Anyway, in Scourge of Armagon, the SG & SSG leave one bullet hole decal every shot, these are rendered through walls in Mark V. 
@DabbingSquidward - Windows 10 Stutter DX9 
Wild guesses:

Only mentioning it because Windows 10 is known to install miscellaneous apps/features without user consent.

I wouldn't normally post wild guesses.

1- Search "Xbox" in windows taskbar's search bar (Bottom left of your screen where Cortana is)
2- Click on the Xbox application icon to open it
3- Find the settings icon (a small gear) on the taskbar to the left side of the Xbox application's window and click on it to open the settings menu
4- Find the Tab labeled " Game DVR" and select it
5- Slide the switch to off to turn off the Game DVR feature.


Other miscellaneous:

"List of things to try
Turn off game dvr
Turn off Windows game mode
Windows advertising stuff.
Turn off in windows update allow downloads from other pcs "
 
@DabbingSquidward - Decals 
I loaded up Hipnotic and in the first level shot both sides of a thinner wall and didn't see a decal on each side.

c:\quake\mark_v.exe -game hipnotic -hipnotic +start

I believe you, but can't replicate it. Do you have a save game you could provide? Like look at the decal and type "save decal". After saving a game it would be in the hipnotic folder, in Mark V you can just type "folder" it will take you there and be called "decal.sav". 
@Baker 
Forgot to mention it, I'm on Windows 7 Home Premium x64.

This is probably common knowledge, but where do I upload saves and screenshots? Sorry for the inconvenience, please bear with me. 
First | Previous | Next | Last
You must be logged in to post in this thread.
Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors.