News | Forum | People | FAQ | Links | Search | Register | Log in
Mark V - Release 1.00
http://quakeone.com/markv/

* Nehahra support -- better and deeper link
* Mirror support, "mirror_" textures. video
* Quaddicted install via console (i.e. "install travail")
* Full external texture support DP naming convention
* Enhanced dev tools texturepointer video inspector video
* IPv6 support, enhanced server capabilities
* Enhance co-operative play (excels at this!)
* Software renderer version (WinQuake)
* "Find" information command (ex. type "find sky")

Thanks to the beta testers! NightFright, fifth, spy, gunter, pulsar, johnny law, dwere, qmaster, mfx, icaro, kinn, adib, onetruepurple, railmccoy

And thanks to the other developers who actively provided advice or assistance: Spike (!), mh, ericw, metlslime and the sw guys: mankrip and qbism.

/Mac version is not current yet ...; Linux will happen sometime in 2017
First | Previous | Next | Last
#2455 
There's a project file for codeblocks. 
In Futute Versions 
Would there be a way to have more that just three cycling autodemos? I test a lot of maps for newbs and like to use Mark V's cl_autodemo. But much of the time I die a lot! Which obv overwrites the dems.

I know I asked for the map name to be added before, I figured heck why not ask for this too. 
Weapon Animation Interpolation 
Hey guys!

Animations of Weapons and Super nailgun in particular still look choppy when firing, though these cvars are enabled :

r_lerpmodels "1"
r_lerpmove "1"

How to make 'em smooth like in DirectQ, for instance? 
 
Animations of Weapons and Super nailgun in particular still look choppy when firing ... How to make 'em smooth like in DirectQ, for instance?

This is a content issue.

FitzQuake (which both Quakespasm and MArkV are derived from) works around it in one way, DirectQ works around it in a different way, and both ways have their pros, cons and trade-offs.

First of all, the issue.

The Quake weapon models have polygons for the muzzle flash animation embedded in them, and when the gun fires the flash polygons are moved into the correct position.

When interpolation is switched on, what this causes is for these polygons to move with interpolation, which causes them to swim into view, and dance back-and-forth across the space between the nailgun barrels.

FitzQuake and derivatives work around this by temporarily switching off interpolation if the gun is in a muzzle flash state.

DirectQ works around it by measuring the delta between vertices in the two frames to be interpolated, and if the delta is sufficiently large (above some arbitrary value that was tweaked until it gave the correct result) assume a muzzle flash motion and don't lerp, on a per-vertex basis.

DirectQ used vertex shaders for everything so it could do this quickly and easily, and it really wasn't much more than an extension of the same kind of thinking as the "assume a teleport and don't lerp" check elsewhere in the engine. It should be obvious that this approach is vulnerable to both false positives and false negatives, however.

The correct way to fix this is new content. A set of weapon models that don't include the flash polygons, a separate generic muzzle-flash model, and the QC code to stitch them together.

Meanwhile, FitzQuake allowed disabling it's behaviour by setting r_lerpmodels to 2 - not sure if MarkV and QS do likewise. 
#2459 
Big thanks for an explanation MH !

"r_lerpmodels 2" works just as intended in Mark V either :)

I've actually wanted to ask you a DirectQ related question since 2013 but was unable to contact you.

You've probably been informed about "sinking into ground" bug that occurs after about an hour of playing in DirectQ. Most of the corpses around the map blow up and the player starts sinking into ground. The only way to solve an issue (temporarily) was to save a game, restart the engine and load it again. I've wondered since then, has there ever been a solution found for eleminating this nasty issue or not? As it is the only major problem I found while playing DirectQ. That source port satisfied me in every aspect of gameplay and gave a really nice old-fashioned feeling of quake experience.

I was running v1.9.0 
 
You've probably been informed about "sinking into ground" bug that occurs after about an hour of playing in DirectQ...

I fucked-up the physics code somewhere, but never was able to determine where. 
#2461 
Yeah... it's a pity.

Apart from that terrible bug, DirectQ is still great

:) 
@dumptruck_ds 
startdemos demo1 demo2 demo3 demo3 etc up to 32 demos
or edit your autoexec.cfg and add :

demos demo1 demo2 demo3 demo4 demo5 demo6 demo7 etc.. 
Oops! That's Not Right 
startdemos assigns the order demos is the console command to skip to the next one in sequence.
so just use startdemos either in the .cfg or console 
@R00k 
I wasn't too clear in my request.

Currently Mark V records 3 autodemos per session: autodemo_0, 1 & 2. If I die a 4th time (happens too often!) autodemo_0 will start from that point in the game, erasing my prior demos. What I'd like is to just keep recording demos 3, 4, 5 and so on.

And would love to have the demo be named the same as the mapname. So e1m3_0, e1m3_1 and so on. 
Anti-funky Weapon Interpolation Models 
@Andrew,

I have a set of view models that someone fixed to work better with interpolation, by hiding the muzzle flash under the gun between the frames where it should appear, so it don't look as weird when fully interpolated. This doesn't make it look perfect (there is still some small movements visible), but it is a definite improvement (most notably for the standard nailgun).

I have no idea where I got these.... I've had them for many years.

http://fvfonline.com/vmodels.zip


Uhh, to use those in Mark V, you'll have to make a mod folder and put them in a "progs" folder in there, and run that game folder (but then they'll only work when you run using that game folder), or go to the hassle of sticking them in an extra pak file to drop in your id1 folder so they will always be used... which I'm sure is what you want.

This is a overly-difficult because Baker doesn't have Mark V (like the other advanced Quake engines) give preference to user-inserted drop-in content outside of pak files. But it really should do that, for reasons such as this! ;) 
@dumptruck_ds 
Qrack has cl_autodemo which names demos automatically.
using mapname_date_time as the filename.
cl_autodemo 1 starts recording at mapload and stops at intermission.
Qrack also has bsp2 support with protocol 666 so it will load any map that markv can load.
http://quakeone.com/qrack if that helps for the time being 
@R00k 
Downloaded - will play with it for sure. Looks like you are still updating this regularly. I wasn't aware. 
 
let me know if there are any config issues i can
help you set it up. 
Dwere Did Some Really Nice Weapon Models 
#2466 
Thank you, mate :)

I will surely give it a try. 
 
MH wrote a nifty ‘hack’ to remove muzzle flash polygons
from the original models.
look for gl_clip_muzzleflash here in gl_mesh
https://github.com/sputnikutah/Qrack/blob/master/gl_mesh.c 
 
This hack, IIRC, is pretty much what I described above. It's a good few years ago so I don't remember details, but I'm pretty certain it uses the same logic. 
Quake Giblets: Mark V 
Enjoy! Feedback welcome. I can always do a sequel with more features.

https://youtu.be/dMOF3l2MtlI 
NE_Ruins (Custom Map) 
A terrible freeze occurs if I use "LAST WEAPON" command bound to MWHEELUP, especially when I picked up the Quad Super Shotgun (Looks like super shotgun from Quake 2). Once I use "bind "MWHEELUP" impulse 12" it freakin' freezes. Only task manager helps to shut the game.

Also Mark V shut down once I entered the bridge with Death Knights. 
NE_Ruins (Custom Map) 2 
It's impossible complete this one with Mark V.

I've solved an issue with a freeze glitch discribed above by setting the following cvar :

"sv_gameplayfix_no_impulse12_override" to "0"

but the enemy which uses yellow shield (some sort of a witch) around itself causes the engine to crash. Once it starts to use that kind of attack the engine instantly crashes.

An emergence of this bug was also tested with a default cfg to eliminate a suspicion that something is wrong with setup. 
Mark V Mouse Input Issues 
Hi guys! New to Mark V, but really enjoying it. The only problem is the mouse input issues that others have touched upon recently, and I have a few things to add:

1. My mouse1 button does tend to get stuck not firing or stuck continuously firingas mentioned before, however it doesn't just extend to mouse1:
-mouse2 also tends to have the problem sometimes in the rare circumstance I use it to scope in. It's difficult to recreate by accident but I can do it sometimes if I purposefully mash it.
-mouse4 and mouse5 also seem to be affected. I use them for next and previous weapon, and they often just don't respond at all.

2. These problems only happen in Mark V, like others have experienced. It cannot ever be recreated in any other game, application, or circumstance. It doesn't seem to matter which mouse I use, either.

3. The most interesting thing is the fact that this doesn't seem to affect other types of keys. I never experienced the issue once after remapping my left click to Ctrl in my mouse software. Furthermore, I had previously mapped the side buttons to 1 and 2 instead of mouse4 and mouse5 in my mouse software and until I changed it back to normal I had never had a problem with those buttons in Mark V.

4.It doesn't seem to be a Windows 10 only issue, as I'm running Windows 7.

Hopefully this can get fixed, because I am really enjoying this engine a lot otherwise. It's difficult to discuss issues like this online without others immediately blaming your mouse despite all the evidence to the contrary or just telling you to switch to another engine like Quakespasm :P 
Re: Post 2476 
Errr... that crash bug with the witch resurrecting fallen enemies in NE_Ruins was fixed years ago. I had reported the issue and delivered hints to fix the problem back then. Are you sure you are using a recent build for Mark V? If it's crashing with a new version, then the issue was accidentally reintroduced and requires fixing again. 
Post 2476 
I'm using v1.99 (Revision 4)

From the section "Download Windows .Zip"

"DirectX / GL / WinQuake''

It seems that this bug bug emerges on the newest version... 
Re: Post 2476 
Yay, that means that Baker must have reverted these fixes in one of his last updates. Try using a previous snapshot and see if it works with those. We need to find the build that broke it. 
First | Previous | Next | Last
You must be logged in to post in this thread.
Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors.