#115 posted by negke on 2018/11/04 12:57:50
That does the trick, thanks.
Muzzle Flash *issue
Is it a non-avoidable side effect that whenever I enable r_waterstyle > 1 that I basically lose the weapons muzzle flash?
I state it as "basically" because sometimes I do get the the muzzle flash effect but I can't determine exactly why. And it's sporadic.
Sorry that I don't know the name of the actual cvar, its just the flash when you fire the weapons, explosions etc.
Broken Coop?
#117 posted by Dr.Gonzo on 2018/12/21 19:44:11
Hi, I tried to get coop to work with the 5361 Afterquake package and it seems that the server is either not running or it actually starts in single player mode. Deathmatch works fine. Am I doing something wrong, or is there a trick to get it running with some cvars? It worked with a previous version (although I couldn't figure out back then which variable would have set no friendly fire - maybe it was just deathmatch which used my coop player starts?).
#118 posted by Spike on 2018/12/22 12:46:27
works for me...
make sure you've not somehow messed up any cvars - these are the ones that come to mind:
deathmatch 0 //boo hiss
coop 1 //hurrah! friendly mode
maxclients 8 //quakeworld engines limit clients and spectators separately, which is a little messy.
sv_playerslots "" //auto - 32 when deathmatch||coop, otherwise 1. max of 255.
samelevel 0
sv_progs progs //force preference for NQ gamecode over QW gamecode - QW mods tend to have no coop, in case you have a qwprogs.dat from other sources.
really, the only difference between coop and deathmatch as far as the engine is concerned is that coop is set instead of the deathmatch cvar.
to disable friendly fire, not only do you need teamplay set, but you also need the players to use the same lower colour (in nq).
Coop
#119 posted by Dr.Gonzo on 2018/12/22 16:24:50
I set the values with the console and it worked; maybe the menu command didn't reset everything that was required correctly.
#120 posted by Qmaster on 2018/12/24 03:57:32
Pants, he means same color pants so you don't hurt each other.
#121 posted by Tribal on 2018/12/29 22:21:07
FTEqw64 version 5361 isn't compatible with Arcane Dimensions?
I'm asking this because i can't load a savegame when i'm using this mod.
When i press F9 or even loading a savefile from the menu, the engine crashes to the desktop and show me this error message: "Bad Entity Lump: 'Particle' not recognised (last ent was 894)"
Even with "sv_savefmt 0" the engine crashes when i press F9.
I also tried the "savegame_legacy" command, but the console says "Error: hidden name (.sav) Unable to use legacy save format"
help :(
#122 posted by Qmaster on 2018/12/30 04:53:24
Is there a way to change console sliding speed to be instant...curious if you can instantly hide the console on map start?
@Qmaster
scr_conspeed 2000(def) increase it until it's near instant.
#124 posted by Tribal on 2019/01/02 20:51:55
Anyone knows if FTE has god-rays auto-generated from the sky?
I remember, a while ago, testing this... i just wrote something in the console and BANG... god-rays from the sky...
but i can't remember the command or even if i was using FTE engine or something else :(
@Tribla
r_sun_colour ( R G B )
Load up start map and try .4 .4 .4
@damage_inc
#126 posted by Tribal on 2019/01/02 23:38:03
Thank you very much =D
#127 posted by Tribal on 2019/01/11 10:04:06
Is there any way to make snow or rain in Hexen2 maps with FTE?
I could be wrong on this but I'd imagine it's no different than for Quake. Since the particles/configs configuration is engine based and not game based.
So the discussion we had recently about Qmasters 2018_xmas map most likely would apply for Hexen2.
But this time I didn't test it so... ymmv!
@damage_inc
#129 posted by Tribal on 2019/01/11 19:32:51
But... to make rain or snow in quake i have to open the map with MarkV, use "tool_texturepointer" to find out the sky's texture name, use "copy ents" to make the ent file, and finally edit the ent file with the sky's name calling the weather effect...
How can i do all of that if MarkV doesn't open hexen2 maps? :/
@Tribal
Are you trying this for stock H2 maps?
@damage_inc
#131 posted by Tribal on 2019/01/11 22:35:03
Yep.
here is what i already tried:
i opened the bsp with quark to know the sky name from the first map and i opened the bsp with notepad++ and copied all the ents to make a ent file (i saw someone talking about this in QuakeOne forums) but even with an ent file calling the rain it doesn't work
but the good news is: the second map came with an ent file (i think it's from an update) i edited it and it worked! Now i have rain in there \o/
in other news... it seems the command line "r_sun_colour (R G B)" to make godrays doesn't change anything in hexen2 :/
@Tribal
FYI: from he console in FTE "sv_saveentfile"
Will be located in "[.../YourGameDir]/fteh2/maps/"
I used TexMex to open the .BSP to find the sky's name. I didn't get the snow/rain to work on a map load though... I have to exec the .cfg from the console to get it to start!
@damage_inc
#133 posted by Tribal on 2019/01/11 23:06:40
Thanks!
Your method will save me a lot of time =D
DERP!
Now I see whyyy I didn't have particles on map load, because I didn't have it ENABLED in the particles menu :faceplam:
#135 posted by Tribal on 2019/01/12 01:26:53
With your method i was capable of make rain in the first map. Thank you! =D
One thing i noticed... when you are at the courtyard (player-starting-point) and you look down, the rain stops... when you look straigh or higher (or right down to the floor), the rain starts again :P
This bug doesn't happen in Quake
anyway, i'm happy to see the fte_weather working in Hexen2 :)
#136 posted by Tribal on 2019/01/25 00:56:56
Hi, there!
I'm trying to play FTE with effectinfo (quakespasm-spiked custom particles)... all particles are working fine, except for the blood particles when you hit an enemy. I can see blood particles falling from gibs, but not when i hit an enemy...
anyone has any idea how can i fix this?
#137 posted by Spike on 2019/01/26 19:54:24
r_particledesc "high effectinfo"
or something. or classic instead of high.
(there's some naming differences that prevents the blood particles from loading)
@Spike
#138 posted by Tribal on 2019/01/26 22:29:19
Thanks!
"r_particledesc classic effectinfo" is perfect =D
FTE QW Single Player Is Broken.
#139 posted by Jeremy on 2019/02/27 17:46:08
I cannot start a single player game with this client. The paths are all correct in the menu. I have everything where it should be and when i go to play a single player game nothing happens when I try. It doesn't load Quake at all. Whats funny is if i download anything with the quake injector I can play the mods fine. Any help with this weird issue would be appreciated.
|