 News | Forum | People | FAQ | Links | Search | Register |
Log in |
|
|
It might be best if you made the siren sound a non looping file, and then made the entity repeatedly play the sound at the same interval as the loop did. That way even if the sound was occasionally overridden by other noises, it should keep returning.
If you only want the Group information in the
Example brush from the { //"0007" "0" ( -128 -512 -48 ) ( -256 -512 -64 ) ( -256 -512 0 ) ROCK18 0 0 90 1.0 1.0 ( -256 -512 0 ) ( -256 -384 -48 ) ( -128 -512 -48 ) ROCK18 0 0 90 1.0 1.0 ( -128 -256 -64 ) ( -256 -384 -64 ) ( -128 -384 -64 ) ROCK18 0 0 90 1.0 1.0 ( -256 -512 0 ) ( -256 -384 -64 ) ( -256 -384 -48 ) ROCK18 0 0 90 1.0 1.0 ( -128 -512 -48 ) ( -256 -384 -48 ) ( -256 -384 -64 ) ROCK18 0 0 90 1.0 1.0 } The "0007" is the Group number and the Group's Index is part of the header information, which gives the Group's name as used in the editor. In this particular example, the Group's number is 7, which I called Island in the editor and coloured it green. I have 25 Groups in this map (not all of which are different coulours) and I switch off any Group that I'm not working on in the display although the editor saves all Groups at every save regardless of the display. If that helps? Hi Mike:
Thanks for your help. Just two questions. So "0007" is the group number. Is "0" the group index? That is, if I have 25 groups, will the group indicies be 0 to 24? Can the group number be any number? Where can I get the BspEditor you use? I don't want to get the wrong one. DieparBaby In my example "0007" is the Group number but I do not know what the "0" is. The index I referred to is a list of the Groups used. Here are the first 9 lines of the file that I used in the example earlier:-
//BSPGROUPS0026 //BSPGROUPINFO"None" "255 255 255" "0" //BSPGROUPINFO"monsters_easy_only" "192 192 192" "0" //BSPGROUPINFO"monsters_norm_only" "192 192 192" "0" //BSPGROUPINFO"monsters_hard_only" "192 192 192" "0" //BSPGROUPINFO"first_area" "255 128 128" "1" //BSPGROUPINFO"cave1" "0 255 128" "0" //BSPGROUPINFO"clip" "255 0 255" "0" //BSPGROUPINFO"island" "128 255 128" "1" The first line shows that I have 26 Groups. They are numbered 0 to 25. The first Group is by default called "None" although it can be renamed but it will always be numbered as zero. The set of three numbers "255 255 255" refer to the outline colour in the editor, in this case it is the default white. I then created the other Groups that you see. I don't know what the last "0" is. You will find BspEditor here http://www.bspquakeeditor.com/ If you use the contact button there, the guy who has updated the editor will respond and will be able to give you much more technical answers than I can - I am just a user. each entity has it's own sound channels, and the game has a maximum number of channels for sounds.
one entity with a sound playing on channel 1 won't override another entity with a sound playing on channel 1. but having one entity start sounds on the same channel is useful, for example on doors. that's how they stop the looping sound when a door stops moving, by playing the stop sound on the same channel. i don't know how many channels the game itself has, but it's not a lot. there may be priority on channels, but i'm not sure. it could just go by which sound was started first. but yeah, if you have any long sound, make sure it's not looped and manually play it again via qc to make sure it never gets cut off. i believe ambient sounds, started at map load time never cut out, but that's just because i've never noticed that happen. I made a mine lamp and wanted to add it as a b_model. But its a *.mdl file.
Is there a program that can make a bsp of it? http://members.home.nl/gimli/Quake.jpg Make sure to add -condebug +developer 1 to engine cmd line and inspect qconsole.log after you've run the engine. What does it say?
What gfx card and OpenGL version is it? Does WinQuake run on it? Does any other OpenGL app run on it? I have +developer 1 cvar for sure, but I'm not sure about -condebug. I'm not also sure about gfx card, and openGL version, I have to check it.
I also don't know if another OpenGL application is running at the same time... Nevertheless, WinQuake is working fine.. while very slow with my current project... (i.e very choppy) I'll verify all these things by monday, and give you feedback then. I'm just wondering if there is any lightmap editor available for q1 format maps. Is it possible to extract the lightmap to images and reimport them into the bsp at all? All I really need is a tool that can increase the brightness whilst still keeping contrast, so a light scale operation would probably also work, but I don't think there are any utils that will do that for me. Does anyone know of anything that can help me? All my maps are too dark on other people's computers because I have such a bright screen...
I don't see anything strange compared to what happened with my home PC in the console. Maybe the 2nd line message that says wipx_init: unable to open control socket but I'm not sure...
I guess it is a WinXP issue... Nevertheless, what should I focus on that could help me to solve this issue ? Gamma correction was designed to compensate for different monitor brightnesses. Have you tried that?
Since you claim that my engine won't start properly, the log should show where it crashes (if it does crash, that is).
I asked for a couple of things before, where are the answers? I can't say anything without a lot more information. I guess so, but it doesn't work on all glquake engines, and some people bitch a lot if a map is too dark on their screens.
OK, sorry for this, but as I'm at office, it is a little bit tricky for me to "play" cause I'm in an open space.. and everybody could see me... :(
Nevertheless, here are the characteristics of the labtop: CPU: Genuine Intel CPU T2500@2.oGHz RAM: 1Go RAM@1GHz VCard: Intel 945GM Express Chipset Family OpenGL Version: Not known but DirectX8 is installed (BTW our IT engineer seemed surprised I mentioned OpenGL for WinXP... where could I pick this information ?) BTW, I just made a small test with glquake131, and the game get stucked at the beginning (no possibility to move at all...), and I had to reset and restart the computer... Oh and here is the qconsole.log Console initialized. Winsock TCP/IP Initialized WIPX_Init: Unable to open control socket Exe: 00:10:49 May 26 2005 32.0 megabyte heap Video mode 1280x720x16 60Hz initialized FOUND: ARB_multitexture FOUND: ARB_texture_env_combine FOUND: WGL_EXT_swap_control FOUND: EXT_texture_filter_anisotropic Sound Initialization Set primary sound buffer format: yes Using secondary sound buffer 2 channel(s) 16 bits/sample 11025 bytes/sec DirectSound initialized Sound sampling rate: 11025 CDAudio_Init: No CD in player. CD Audio Initialized joystick not found -- no valid joysticks (a5) ========= Quake Initialized ========= execing quake.rc execing default.cfg execing config.cfg execing autoexec.cfg Unknown command "gl_texquality" Unknown command "r_interpolate_model_weapon" SpawnServer: start Clearing memory Programs occupy 405K. meshing progs/player.mdl... 408 tri 628 vert 1367 cmd meshing progs/eyes.mdl... 16 tri 24 vert 53 cmd meshing progs/h_player.mdl... 40 tri 64 vert 141 cmd meshing progs/gib1.mdl... 28 tri 46 vert 102 cmd meshing progs/gib2.mdl... 82 tri 138 vert 305 cmd meshing progs/gib3.mdl... 20 tri 32 vert 71 cmd meshing progs/v_axe.mdl... 184 tri 288 vert 629 cmd meshing progs/v_shot.mdl... 128 tri 190 vert 412 cmd meshing progs/v_nail.mdl... 188 tri 312 vert 687 cmd meshing progs/v_rock.mdl... 54 tri 86 vert 189 cmd meshing progs/v_shot2.mdl... 152 tri 250 vert 550 cmd meshing progs/v_nail2.mdl... 190 tri 302 vert 661 cmd meshing progs/v_rock2.mdl... 124 tri 204 vert 449 cmd meshing progs/bolt.mdl... 26 tri 52 vert 118 cmd meshing progs/bolt2.mdl... 26 tri 40 vert 88 cmd meshing progs/bolt3.mdl... 26 tri 40 vert 88 cmd meshing progs/lavaball.mdl... 20 tri 32 vert 71 cmd meshing progs/missile.mdl... 58 tri 100 vert 222 cmd meshing progs/grenade.mdl... 14 tri 24 vert 54 cmd meshing progs/spike.mdl... 4 tri 8 vert 19 cmd meshing progs/s_spike.mdl... 4 tri 8 vert 19 cmd meshing progs/backpack.mdl... 110 tri 160 vert 346 cmd meshing progs/zom_gib.mdl... 20 tri 32 vert 71 cmd meshing progs/v_light.mdl... 172 tri 282 vert 620 cmd meshing progs/flame2.mdl... 86 tri 140 vert 308 cmd meshing progs/flame.mdl... 122 tri 198 vert 435 cmd meshing progs/zombie.mdl... 347 tri 559 vert 1225 cmd meshing progs/h_zombie.mdl... 49 tri 73 vert 159 cmd 40 entities inhibited trigger_teleport, target 't11' has no target Server spawned. CL_EstablishConnection: connected to local 3 demo(s) in loop Client LOCAL connected VERSION 1.09 SERVER (4223 CRC)Serverinfo packet received. Introduction CDAudio: drive not ready CL_SignonReply: 1 CL_SignonReply: 2 CL_SignonReply: 3 26.3 megabyte data cache CL_SignonReply: 4 Sending clc_disconnect VID_Gamma_Restore: failed on SetDeviceGammaRamp Hope it is enough :) Comments to the info; I've heard Intel onboard chips (and/or drivers) are terrible for gaming, so that might be the reason. OpenGL info should be obtainable from the desktop RMB configuration (advanced). Maybe newer (or older) drivers are available from Intel?
If you had listed the qconsole.log contents from the run of my GLQuake instead of Fitz, you'd also known the GL-version ;) Didn't you get any log from my run? You could try adding option -nomtex to see if that makes any difference. Try also -window to see if window operation is possible and use desktop resolution. Have you tried another OpenGL app (i.e. not Quake) to see if that works? If you don't know any other, there should be screensavers in XP that use OpenGL. You could of course also try other Q1 engines; Joe, DP You could also try asking Baker at QuakeOne forums, he seems to know a lot about Quake startup problems. if they want to use an engine that doesn't support gamma, there is still a way to do it.
In the control panel, the display settings for most cards should provide a way to set hardware gamma. This is exactly the same gamma setting that fitzquake/darkplaces modify when playing, by the way. There is also a program called "setgamma" which you can add to a batch file if you want a one-click shortcut to launch the game with the correct gamma. For example: setgamma 0.6 glquake setgamma 1 You can get setgamma from the fitzquake website here (direct link): http://www.celephais.net/fitzquake/files/setgamma12.zip Is there an easy way to do it other than by tweaking all the lights individually?
Just read the txt files for tyrlight and Bengt's light tools and found -range and -dist command line options in the tyrlite text file. Hopefully that will work ok. Fingers crossed. If any of you tools guys are listening, a brightness/contrast adjust option would probably be pretty damn cool too (that affects the lightmap after generation and I suppose would be able to be run on any bsp), if it is straightforward enough to implement. Since tweaking light levels in already existing bsps is the main reason why I've developed my Light tool, there are a lot of possibilities to very easily set new parameters from the cmd line.
Check out the readme carefully, experiment a bit and you'll see how easy and fast it is. And the tool that does the brightness/contrast level adjustments is Doesn't setting a minlight increase all brightness in the map? It might look bad, but it can't be much worse than adjusting the gamma.
only sets a higher minimum value. All lightmap areas that are above that value won't change.
I made a second try this morning, using -window and/or -nomtex, but it didn't help at all... :/ After the game was launched, and stucked, I had a WinXP message stating that ialtmngr5 process was not responding... (I'm not sure about the name of the process). but it seems that it comes from the Video Card (I asked to my IT engineer that looked my suspiciously...)...
I made the same tests with FitzQuake, and fortunately it is working perfectly in window mode ! No more flickering/HOM like effects Thanks a lot for the information: you rock ! Let's hope it continues to work, there are probably driver issues (the engine should never be able to bring down the OS). Also note that you might be running in 16bpp colour mode (the earlier Fitz log indicated that).
Only if you use TyrLite minlight (default), if you use additive minlight (ArghLite style, option -addmin) instead, you'll get a *much* better minlight effect. It's actually one of the really essential features of my Light tool.
|
|
| You must be logged in to post in this thread. |
|
| Website copyright © 2002-2024 John Fitzgibbons. All posts are copyright their respective authors. |